Best AMF Panel In Lucknow: EC3 POWERCON

Best AMF Panel Manufacturer in Lucknow: In the vibrant city of Lucknow, where every heartbeat resonates with a blend of tradition and modernity, EC3 POWERCON stands tall as the beacon of reliability in the realm of AMF (Auto Mains Failure) panels. As the demand for seamless power management continues to surge, EC3 POWERCON emerges as the undisputed leader, delivering top-notch solutions that not only meet but exceed expectations.

What is the Best AMF Panel Manufacturer in Lucknow?

Automatic mains failure (AMF) panels, often referred to as automatic transfer switch (ATS) panels, make the power switch to emergency standby generators in the event of a significant loss of mains power or total blackout. Without AMF panels, generators need to be operated manually and that can mean lost data, potential damage to electrical equipment, and huge amounts of disruption.

AMF and ATS panels monitor the incoming AC mains supply, activate the standby generator when mains power fails, and make an automatic electrical transfer of the building’s load from the mains to the generating set. When the mains supply returns, the AMF panel controls a return to the mains supply and shuts down the generator after a suitable cooling run.

AMF may constitute of following hardware

• Fuses/Isolator/MCCB/MCB/ACB/ as incomer switch/ protection for Mains supply and DG supply.
• Contactor/Motorised changeover/ ACB / Motorised MCCB for changeover
• AMF controller/ Timer logic for changeover command changeover system.
• DC relays for ON/ OFF operation of DG
• Protection relays for DG and Mains
• AC, DC metering for Mains and DG.
• Audio and video annunciation for various faults of DG.
• Wiring, busbar, Enclosure, etc.

Stepwise operation of the AMF Panel is as follows:-

• In case of Mains supply failure, AMF Panels send a start command to DG after a set time delay.
• When DG comes to generate its rated voltage i.e. it satisfactorily starts then after a set time delay AMF panel does a changeover of the Mains source to the DG source via Contactor/Motorised changeover/ ACB / Motorised MCC.
• When the Mains supply is restored then changeover takes place instantly and the AMF panel changes the source back to the Mains supply.
• It sends a close command to DG after the set time.

Features oF Best AMF Panel Manufacturer in Lucknow

• Dual source/ single source KWH Meter for KW metering of Mains/ DG.
• Frequency meter, Power factor meter, and Multifunction Meter based on customer demand.
• Common fault protections such as Overload, Over/under voltage, Over/under frequency, Phase sequence, Reverse power, Earth fault etc.
• Advanced protections such as Restricted earth fault, Generator differential protection, IDMT overcurrent earth fault relay, Master trip, Field failure relay, Vector shift relay, trip circuit supervision, etc.

AMF Panel Working

When the AMF panel senses that mains has failed then it provides a start signal to the DG. After starting the DG, the breaker is connected to the load. This all activity has been done automatically.

When a backup supply is detected the AMF panel sends a tripping signal to the DG breaker after tripping the DG breaker another signal is sent to the EB supply breaker resulting in the mains supply being resumed.

Components of AMF Panel 

In the metering section, various measuring instruments play a crucial role in gauging system parameters. These instruments of the Best AMF Panel Manufacturer in Lucknow include volt meters, amp meters, multifunction meters, and more.

• Measuring Meters:
  • Types: Both analogue and digital meters are utilized in panels.
  • Variety: The meters encompass amp meters, volt meters, multi-function meters, and energy meters.
  • Flexibility: They can be employed in either digital or analogue formats based on specific needs.
• Indicators:
  • Function: Indicators provide insights into the operational status of the panel.
  • Diversity: Different-colored indicators are used for various phases (R, Y, B), as well as for indicating the status of the DG (Diesel Generator) – whether it’s ON or OFF.
• Push Buttons:
  • Functionality: Various push buttons serve specific purposes, such as starting and stopping the DG, and an emergency switch.
• Selector Switches:
  • Types: Selector switches include an amp selector switch, a voltage selector switch, and an auto/manual switch.
• AMF Controller:
  • Control Relay: The AMF control relay is integral for managing the AMF panel.
  • Monitoring: A monitoring relay oversees voltage, current parameters, and DG-related parameters, sending signals for tripping and connection as necessary.

Conclusion

When it comes to reliable and efficient AMF panels in Lucknow, EC3 POWERCON stands out as the best choice. Their commitment to quality, cutting-edge technology, and customer satisfaction sets them apart in the industry. With EC3 POWERCON, you’re not just getting a product; you’re gaining a partner dedicated to ensuring your power management needs are met seamlessly. Trust in their expertise for a power solution that’s not only top-notch but also comes with a personalized touch, making EC3 POWERCON the preferred AMF panel manufacturer in Lucknow.

You can also buy

Synchronizing Panel

APFC Panel -Automatic Power Factor Correction Panel

Motor Control Center (MCC) Panel

Fire Fighter Panel

Power Control Center Panel

FAQ